Wizdeo Analytics

How to Make a Boring Head - Part 2

Ajouté le sam. 9 déc. 2023 Science et technologie Rectangular HD

Part 1: https://www.youtube.com/watch?v=HiZ7l2i_l_4

This is part 2 of my boring head build in which I finish this toolmaking project.
In this second episode I make the adjustment screw with fine thread and dial and the bearing parts which hold the screw in place. After this I finish the main body parts including some milling into final shape and drilling all the boring bar holes. In the end I electro etch the markings to the boring head body and the scale and numbers to the adjustment screw.

I hope you find this build interesting. Feel free to comment and ask your questions and suggestions below in the comment section.
If you want more of this Mini Lathe and hobby engeneering / toolmaking content, I invite you to subscribe to the channel.

Support me via Patreon: www.patreon.com/wecandothatbetter

- How to electro etch - video: https://www.youtube.com/watch?v=kuDS4MJGWBo
- Dividing attachment for the lathe - video: https://www.youtube.com/watch?v=MtQ3jYbbrEo

Thank you very much.WCDTB

00:00 Intro
00:15 Making the adjustment spindle
06:25 Making the brass bearing block
10:31 Making the retaining washer
13:24 Finish turning the main parts
15:14 Milling a flat the the body
16:18 Adding the tool mounting holes
17:44 Bringing the lower body into final shape
19:36 Electro etching the main body
20:25 Electro etching the adjustment scale
22:00 Final assembly